Citrix SD-WAN Series - Connecting to the SD-WAN VPX and Testing the Deployment

Citrix SD-WAN Platforms
6. Log into the VM console. The default login credentials for the new SD-WAN VPX-SE VM are as
follows:
• Login: admin
• Password: password
This displays the console Welcome message, which includes the Host IP Address.
7. Record the Management IP Address for the SD-WAN VPX-SE VM.
Note
The DHCP server must be present and available in the SD-WAN, or this step cannot be completed.
Aer logging into the console, the Welcome message displays the Last login information and the Host
IP Address. This IP Address is the Management IP Address for this new SD-WAN VPX-SE VM.
This completes the deployment of the SD-WAN VPX-SE Virtual Machine. The final step is to connect to
the new SD-WAN VPX-SE and test the deployment. Instructions are provided in the next section.
Connecting to the SD-WAN VPX and Testing the Deployment
June 25, 2020
The next step is to connect to the new SD-WAN VPX-SE Virtual Appliance, to confirm that the deploy-
ment was successful.
To test the deployment, do the following:
© 1999-2021 Citrix Systems, Inc. All rights reserved. 184