Citrix SD-WAN Platforms
1. On a connected PC, open a browser and enter the Management IP Address for the SD-WAN
VPX-SE Virtual Appliance. You can use any PC connected to your network (for example, the local
PC you used to deploy the SD-WAN VPX-SE Virtual Machine in the vSphere Client). If you have
successfully assigned the Management IP Address for the SD-WAN VPX-SE, the Management
Web Interface Login page displays.
2. Enter the Administrator user name and password, and click Login.
• Default Administrator user name: admin
• Default Administrator password: password
Note
It is recommended that you change the default password as soon as possible. Be sure to record
the password in a secure location, as password recovery might require a configuration reset.
Aer you have logged into the Management Web Interface, the Dashboard page displays.
The first time you log into the Management Web Interface on an appliance, the Dashboard displays
an Alert icon (goldenrod delta) and alert message indicating that the Virtual WAN Service is disabled,
and the license has not been installed. For now, you can ignore this alert. The alert will be resolved
© 1999-2021 Citrix Systems, Inc. All rights reserved. 185
To Next Page
Loading...
Need help?
General