Citrix SD-WAN Platforms
Citrix SD-WAN 4000 SE
June 25, 2020
The SD-WAN 4000 is a 2U appliances. Each model has two 6-core processors for a total of 12 phys-
ical cores (24 cores with hyper-threading), and 48 GB (GB) of memory. The SD-WAN 4000 SE has a
bandwidth of 300 Mbps, 500 Mbps, 1 Gbps, and 2 Gbps respectively.
The following figures shows the front panel of the SD-WAN 4000 SE appliance.
Figure 1.SD-WAN 4000 SE, front panel
The Citrix SD-WAN 4000 SE appliances have the following ports:
• 10/100Base-T copper Ethernet Port (RJ45), also called LOM port. You can use this port to re-
motely monitor and manage the appliance independently of the appliance’s soware.
Note: The LEDs on the LOM port are not operational by design.
• RS232 serial console port.
• Two 10/100/1000Base-T copper Ethernet management ports (RJ45). These ports are used to
connect directly to the appliance for system administration functions.
• Network Ports
– SD-WAN 4000 SE (without FTW cards). Eight 1G SFP ports and four 10G SFP+ ports.
– SD-WAN 4000 SE (with FTW cards). Eight 1G copper Ethernet ports and four 10G ports.
The following figure shows the back panel of the SD-WAN 4000 SE appliance.
Figure 2. SD-WAN 4000 SE, back panel
© 1999-2021 Citrix Systems, Inc. All rights reserved. 92
To Next Page
Loading...
Need help?
General