Citrix SD-WAN Series - Citrix SD-WAN 110 Standard Edition Appliances

To Next Page

To Previous Page

Citrix SD-WAN Platforms

Citrix SD-WAN 110 Standard Edition Appliances

February 9, 2021

The Citrix SD-WAN 110 SE platform is a branch side appliance that can be deployed in micro and small

branch oices/ remote sites/ retail stores, and temporary worksites. A single box-in-branch solution

helps to reduce the hardware footprint and eases branch deployment.

The Citrix SD-WAN 110-SE appliance is a desktop form factor appliance. This appliance has 2-core

processor with 4 GB memory and 32 GB of storage (SATA-DOM drive).

The Citrix Compliance Regulatory models are:

• SD-WAN 110

• SD-WAN 110-LTE-WiFi

• SD-WAN 110-WiFi

For more information, see the following:

• Citrix SD-WAN platform data sheet

• Citrix SD-WAN 110 SE Quick Start Guide: ZTD via the WAN Interface

• Citrix SD-WAN 110 LTE Wi-Fi Quick Start Guide: ZTD via the LTE Interface

• Citrix SD-WAN 110 LTE Wi-Fi Unboxing and Installation

• Citrix SD-WAN 110 LTE Wi-Fi Compliance

• Citrix SD-WAN 110 Wi-Fi Compliance

Note

The 110-SE appliance cannot be configured as an MCN.

To log in to the SD-WAN 110 SE management web interface, use the following credentials.

• Default administrator user name: admin

• Default administrator password: The Serial Number of the appliance, found at the bottom of

the appliance chassis.

Note

On a first time login, you are requested to change the default password to a password of

your choice.

Citrix SD-WAN 11.1.0 is the minimum soware version required for Citrix SD-WAN 110-SE appliance.

Citrix SD-WAN 11.3.0 is the minimum soware version that supports Wi-Fi capabilities for Citrix SD-

WAN 110-LTE-WiFi and Citrix SD-WAN 110-WiFi-SE model.