Citrix SD-WAN Platforms
15. To continue the configuration, acceptthe certificate and continue. The option to continue varies
according to the web browser you are using.
16. Run steps 4 through 25 of the Configuring the Appliance by Connecting a Computer to the Eth-
ernet Port procedure to complete the configuration process.
Setting up the SD-WAN Appliance
June 19, 2020
To set up the SD-WAN appliance hardware, see the instructions documented in the Setting up the
appliance hardware section.
Citrix SD-WAN 5100 Premium (Enterprise) Edition Appliance
June 19, 2020
Citrix SD-WAN Premium (Enterprise)Edition 5100 appliances are high-performance appliances for
busy datacenters.
This appliance is designed to operate Virtual WAN links with speeds more than 1 Gbps for busy data-
centers that communicate with many branch and regional sites.
SD-WAN 5100 PE (EE) is recommended at the hub of a hub-and-spoke deployment, where smaller
appliances are used at the spokes, whenever the link speed or the number of XenApp/XenDesktop
users is higher than that can be supported by a smaller appliance.
Citrix SD-WAN 5100 PE
June 26, 2020
The SD-WAN 5100 PE is a 2U appliance. Each model has two 10-core processors for a total of 20 phys-
ical cores (40 cores with hyper-threading), and 128 GB (GB) of memory. For latest performance and
bandwidth capacity details, see the latest datasheet that gets updated more regularly at: citrix.com;
datasheet.
The SD-WAN 5100 PE appliance front panel has the following ports:
• 10/100Base-T copper Ethernet Port (RJ45), also called lights out management (LOM) port. You
can use this port to remotely monitor and manage the appliance independently of the appli-
ance’s soware.
© 1999-2021 Citrix Systems, Inc. All rights reserved. 140
To Next Page
Loading...