Citrix SD-WAN Platforms
If you want to configure the appliance by connecting it to the computer through the serial console,
assign the management service IP address from your set up appliance by completing the Assigning a
Management IP Address through the Serial Console procedure.
Citrix SD-WAN WANOP 1000
June 19, 2020
The Citrix SD-WAN WANOP 1000 platform has 3 models: SD-WAN 1000-06, SD-WAN 1000-010, and SD-
WAN 1000-020, with bandwidths of 6Mbps, 10Mbps, and 20Mbps, respectively. Each model is a 1U
appliance with one quad-core processor and 24 gigabytes (GB) of memory.
The following figure shows the front panel of an SD-WAN 1000 appliance.
The front panel of the Citrix SD-WAN WANOP 1000 appliance has a power button and five LEDs.
• The power button switches main power (the power to the power supply) on or o.
• The reset button restarts the appliance.
• The LEDs provide critical information about dierent parts of the appliance.
Figure 1. Citrix SD-WAN WANOP 1000, front panel
The appliance has the following ports:
• An RS232 serial console port.
• A copper Ethernet (RJ45) management port. The management port is used to connect directly
to the appliance for system administration functions.
• Four 10/100/1000Base-T copper Ethernet ports numbered 1/1, 1/2, 1/3, and 1/4 from le to right.
The four ports form two accelerated pairs, which function as accelerated bridges. Ports 1/1 and
1/2 are accelerated pair A (apA), and 1/3 and 1/4 are accelerated pair B (apB).
The following figure shows the back panel of an SD-WAN 1000 appliance.
Figure 2. Citrix SD-WAN WANOP 1000 appliance, back panel
© 1999-2021 Citrix Systems, Inc. All rights reserved. 11
To Next Page
Loading...