Citrix SD-WAN Series - Assigning a Management IP Address through the Serial Console

To Next Page

To Previous Page

Citrix SD-WAN Platforms

25. You need more configuration on the appliance if you intend to use some of the modes and fea-

tures, such as, virtual inline mode, video caching, secure peering, high availability, encrypted

CIFS/MAPI acceleration, AppFlow monitoring, or SNMP monitoring.

Note:

• Inline installations place the appliance between your LAN and WAN routers, using both

ports of the accelerated bridge, such as ports LAN1 and WAN1 on an SD-WAN 1000 appli-

ance with Window Server or ports 1/1 and 1/2 on SD-WAN 2000 appliance with Windows

Server, for the apA accelerated bridge port.

• WCCP and virtual inline installations connect a single accelerated bridge port to your WAN

router.

• Virtual inline installations require that you configure your router to forward WAN traic to

the appliance. See Router Configuration.

• WCCP installations require configuration of your router and the appliance. See WCCP Mode.

Assigning a Management IP Address through the Serial Console

May 23, 2019

If you do not want to change the settings of your computer, you can perform initial configuration by