Citrix SD-WAN Series - Citrix SD-WAN 400 and 410 Standard Edition Appliances

To Next Page

To Previous Page

Citrix SD-WAN Platforms

Specifications Details

Other Features Dipole Swivel Terminal antenna

Hinged 90° termination with SMA(M)

Connector

RoHS Compliant

Citrix SD-WAN 400 and 410 Standard Edition Appliances

June 19, 2020

The Citrix SD-WAN 400 SE and 410 SE are 1U appliances for use in small branch oices. The SD-WAN 410

SE Series is the nextgeneration of SD-WAN Standard Edition applianceswith Virtual WAN functionality.

• SD-WAN 400 Series: A small, aordable 1U appliance suitable for smaller branch oices. The

SD-WAN 400 SE Series has two accelerated bridges and supports WAN speeds of up to 50 Mbps.

• SD-WAN 410 Series: A small, aordable 1U appliance suitable for smaller branch oices. The

SD-WAN 410 SE Series supports WAN speeds of up to 150 Mbps.

The 400-SE platform is Hypervisor based and 410-SE is a bare metal appliance.

Within a given series, all models use the same hardware, and the dierent WAN speed ratings are

obtained through dierent licensing options. For example, the SD-WAN 410 SE models (the 410-20,

410-50, 410–100, and 410–150) use the same hardware, and an appliance can be licensed as either a

20 Mbps, 50 Mbps, 100 Mbps, or 150 Mbps appliance.

The licensed bandwidth applies only to the sending direction, so an SD-WAN 410 SE-20, rated at 20

Mbps in the sending direction, is appropriate for Virtual Path (fixed/dynamic) with a 16 Mbps/8 Mbps

download/upload bandwidth.

In addition to dierences in WAN bandwidth capabilities, the dierent series vary in CPU power, in-

stalled RAM, and installed disk capacity.

All models use solid-state drives instead of conventional hard drives for increased speed and reliabil-

ity.

The Citrix Compliance Regulatory models for SD-WAN 400-SE and 410-SE are:

• SD-WAN 400-SE: CB 504-2

• SD-WAN 410-SE: 512-2

For more information, see the Citrix product platform datasheet.