Citrix SD-WAN Series - Citrix SD-WAN WANOP 800

To Next Page

To Previous Page

Citrix SD-WAN Platforms

All SD-WAN platforms have similarcomponents and hardware platforms oer a wide range of features,

communication ports, and processing capacities. All platforms support the SD-WAN soware and

have multicore processors. These appliances have similar architectures, run the same release bina-

ries, and are fully supported with release 9.2.

Citrix SD-WAN WANOP 800

May 23, 2019

The Citrix SD-WAN WANOP 800 platform has a dual-core processor and 8 GB of memory. The platform

has a bandwidth of up to 6 Mbps and up to 10 Mbps, respectively.

The following figure shows the front panel of an SD-WAN WANOP 800 appliance.

Figure 1. Citrix SD-WAN 800, front panel

• The front panel of the SD-WAN 800 appliance has a power button and five LEDs.

• The power button switches main power (the power to the power supply) on or o.

• The reset button restarts the appliance.

The LEDs provide critical information about dierent parts of the appliance.

• Power Fail—Indicates that a power supply unit has failed.

• Information LED—Indicates the following:

Status Description

Continuously on and red The appliance is overheated. (This might be a

result of cable congestion.)

Blinking red (1 Hz) Fan failure.

Blinking red (0.25 Hz) Power failure.

Solid blue Local UID has been activated. Use this function

to locate the server in a rack mount

environment.