Citrix SD-WAN Platforms
The following components are visible on the back panel of the Citrix SD-WAN 5100 WANOP appliance:
• Six 800 GB removable solid-state drives, which store the appliance’s compression history.
• Power switch, which turns o power to the appliance, as if you were to unplug the power supply.
Press the switch for five seconds to turn o the power.
• Two 1 TB removable hard disk drive.
• Disable alarm button. This button is functional only when the appliance has two power sup-
plies. Press this button to stop the power alarm from sounding when you have plugged the ap-
pliance into only one power outlet or when one power supply is malfunctioning and you want
to continue operating the appliance until it is repaired.
• Two power supplies (either AC or DC). providing full hot swap redundancy. Each power supply
has an LED indicating its status.
Summary of Hardware Specifications
June 19, 2020
The following tables summarize the specifications of the Citrix SD-WAN 4100/5100 WANOP hardware
platforms.
Specifications 4100 WANOP 5100 WANOP
Bandwidth Up to 1 Gbps Up to 2 Gbps
Regulatory model number 2U1P1B 2U1P1D
Processors 2 X 6 Core 2.60 GHz 2 X 10 Core 2.80 GHz
HDD 2x 1 TB HDD boot drives in
RAID 1 (mirroring) mode
2x 1 TB HDD boot drives in
RAID 1 (mirroring) mode
SSD 4x 800 GB 6x 800 GB
Memory 96 GB 128 GB
© 1999-2021 Citrix Systems, Inc. All rights reserved. 37
To Next Page
Loading...
Need help?
General