Citrix SD-WAN Series User Manual

Citrix SD-WAN Platforms
The following components are visible on the back panel of the SD-WAN 2000 appliance with Windows
Server:
• 600 GB removable solid-state drive, which stores the appliance’s soware and user data, and 1
TB hard disk drive.
• Power switch, which switches power to the appliance on or o. Press the switch for five seconds
to switch o the power.
• USB port (reserved for a future release).
• Non-maskable interrupt (NMI) button, for use at the request of Technical Support to produce a
core dump. You must use a pen, pencil, or other pointed object to press this red button, which
is recessed to prevent unintentional activation.
• Single power supply, rated at 300 watts, 100–240 volts.
Ethernet Port Names
May 23, 2019
When configuring the appliance, you have to specify IP addresses for various Ethernet ports of the
appliance. The Ethernet ports are named dierently on the front panel of Citrix SD-WAN 1000 and
2000 appliances with Windows Server, in the Citrix SD-WAN instance, and in the Windows Server, as
shown in the following table:
SD-WAN 1000WS SD-WAN 2000WS SD-WAN Instance Windows Server
MGMT (Blue) 0/1 (LOM/PRI) Primary Citrix PV Ethernet
Adapter #0: 0/1
AUX 0/2 (AUX) Aux Citrix PV Ethernet
Adapter #1: 0/2
apA LAN1/WCCP
(Green)
1/1 apA.1 N/A
apA WAN1 1/2 apA.2 N/A
© 1999-2021 Citrix Systems, Inc. All rights reserved. 25

Citrix SD-WAN Series Specifications

General

Product Type	SD-WAN Appliance
Product Series	SD-WAN
Network Interfaces	Gigabit Ethernet
Performance	Varies by model
Form Factor	Rackmount
Management	CLI
Throughput	Varies by model
Interfaces	Ethernet
VPN Support	IPsec, SSL VPN
High Availability	Yes
Security Features	Firewall
WAN Optimization	Application Acceleration, Data Deduplication, Compression