Citrix SD-WAN Series User Manual

Citrix SD-WAN Platforms
Note
By default, all SD-WAN VPX-SE Virtual Appliances use DHCP. If you are not using DHCP, or have
assigned a static IP Address for the Virtual Appliance, you can skip this step. If you are using
DHCP, the DHCP server must be present and available in the SD-WAN before you can complete
this step.
To display the DHCP-assigned Management IP Address for the Virtual Appliance, do the following:
1. Continuing in the vSphere client Inventory page, select the new SD-WAN VPX-SE VM in the In-
ventory tree (le pane). This displays the Inventory page for the SD-WAN VPX-SE VM.
2. If you have not already done so, power on the new Virtual Machine. In the Basic Tasks section,
click the Play icon (green arrow) to power on the new SD-WAN VPX-SE VM.
3. Select the Console tab in the Inventory page tab bar. The Console tab is located in Inventory
page tab bar at the top of the main page area. Selecting this tab displays and enables access to
the CLI console for the VM.
© 1999-2021 Citrix Systems, Inc. All rights reserved. 182

Citrix SD-WAN Series Specifications

General

Product Type	SD-WAN Appliance
Product Series	SD-WAN
Network Interfaces	Gigabit Ethernet
Performance	Varies by model
Form Factor	Rackmount
Management	CLI
Throughput	Varies by model
Interfaces	Ethernet
VPN Support	IPsec, SSL VPN
High Availability	Yes
Security Features	Firewall
WAN Optimization	Application Acceleration, Data Deduplication, Compression