Citrix SD-WAN Platforms
8. Apply the staged settings for the VM interface. Do the following:
a) Type the following command at the set_management_ip prompt:
Apply
b) When prompted to confirm the apply operation, type Y. This applies the staged interface
settings for the VM, and appears the results.
9. Type exit and press Return at the prompt to exit the management_ip CLI.
10. Exit the console. Type exit and press Return at the console prompt, and then press Ctrl+Alt to
regain control of the cursor.
11. Shutdown and start the VM. Do the following:
a) Choose the Getting Started tab to display the Basic Tasks options.
b) In the Basic Tasks section, choose shutdown the virtual machine (red check box icon).
You are prompted to confirm that you want to end the guest operating system for the VM.
c) Choose Yes to confirm. This shuts down the guest operating system and powers o the
VM. When the shutdown completes, the Power on the virtual machine option (green play
mouse button) becomes available.
12. Start the virtual machine. Choose Power on the virtual machine (green right-arrow) to start
the VM. You can view the progress of the start-up process in the Console tab page for the VM.
When the startup process completes, the login prompt displays. You can now proceed to the final step,
Connecting to the SD-WAN VPX-SE and Testing the Deployment.
NOTE
• From 10.2.6 and 11.0.3 release onwards, it is mandatory to change the default admin user
account password while provisioning any SD-WAN appliance or deploying a new SD-WAN
SE VPX. This change is enforced using both CLI and UI.
• A system maintenance account - CBVWSSH, exists for development and debugging and has
no external login permissions. The account can only be accessed through a regular admin-
istrative user’s CLI session.
© 1999-2021 Citrix Systems, Inc. All rights reserved. 205
To Next Page
Loading...
Need help?
General