Citrix SD-WAN Platforms
4. Confirm the selection with Continue.
5. On the Choose Instance Type screen, select the EC2 Instance Type that was identified during
preparation, then select Next: Configure Instance Details.
6. Enter instance details (anything not specified must be le unset/default):
• Number of Instances: 1
• Network: select VPC previously created>
• Subnet: select Mgmt Subnet previously defined
• Auto-assigning Public IP: enabled
• Network interfaces > Primary IP: enter predefined Mgmt IP
© 1999-2021 Citrix Systems, Inc. All rights reserved. 283
To Next Page
Loading...