Citrix SD-WAN Platforms
5. Set the appropriate Data/Time for the new AMI:
• On the SD-WAN web interface, navigate to Configuration > System Maintenance > Date/-
Time Settings
• Set the correct date and time using NTP, Date/Time Setting, or Timezone
Note
The SD-WAN SE AMI Virtual WAN Service remains disabled until an appliance package (So-
ware + Configuration) is installed on the AMI.
Add SD-WAN SE AMI to your SD-WAN environment
To add SD-WAN AMI to your SD-WAN environment:
1. Navigate to your SD-WAN Center or Master Control Node for your SD-WAN environment.
© 1999-2021 Citrix Systems, Inc. All rights reserved. 293
To Next Page
Loading...