Citrix SD-WAN Platforms
Solution validation topology/network architecture
Below is the step-by-step configuration guide to provision an SD-WAN appliance in AWS Outposts.
Prerequisites
1. Log into the Outposts AWS Account.
2. Have access to the Citrix SD-WAN AMI from the market place of AWS Outposts.
NOte
All the snapshots of AWS Outpost console provided in the configuration guide are done with the
new console launched by AWS and may not be looking exactly the same, if a legacy UI is selected.
Creation of VPC on Outposts for Citrix SD-WAN appliance (VPXL type)
1. Provide a CIDR block for the AWS Outpost VPC. For this configuration we use a CIDR of
192.168.100.0/22.
2. Leave all other attributes as default.
3. Provide the tag names as necessary to identify the appliance from the instance list for future.
© 1999-2021 Citrix Systems, Inc. All rights reserved. 326
To Next Page
Loading...