Citrix SD-WAN Series - Page 334

Citrix SD-WAN Platforms
4. Add Routes for management Subnet (Default via IGW).
Next step is to add the route to the management to reach the Internet for public Access.
• Select the management route table.
• Click Edit routes.
• Provide a new DEFAULT route 0.0.0.0/0 via the IGW instance we created in step 2.
• Save Routes.
Define route tables for the WAN subnet
1. Create the Route table for WAN Interface
• Click Route tables under VPC.
• Click create route table.
• Select the VPC created for SD-WAN in step 1.
© 1999-2021 Citrix Systems, Inc. All rights reserved. 334