Citrix SD-WAN Series - Page 336

Citrix SD-WAN Platforms
4. Add Routes for WAN Subnet (Default via IGW).
Next step is to add the route to the WAN to reach the Internet for public Access.
• Select the WAN route table.
• Click Edit routes.
• Provide a new DEFAULT route 0.0.0.0/0 via the IGW instance we created in step 2.
• Save Routes.
Define route tables for the LAN subnet
1. Create the Route table for LAN Interface
• Click Route tables under VPC.
• Click create route table.
• Select the VPC created for SD-WAN in step 1.
• Click create.
© 1999-2021 Citrix Systems, Inc. All rights reserved. 336