Citrix SD-WAN Platforms
7. The Access Interface settings are as follows. The 10.100.0.1 IP is an Azure reserved IP.
8. HA settings are as follows. The primary and secondary IP address as part of this HA setting
must be configured with the AUX Interface IP address of both Primary and Secondary Virtual
Machines respectively.
9. Click Apply.
10. To have LAN traic go through SD-WAN, add a route table on Azure with a route whose next
hop points to Azure Internal Load-balancer IP. And associate the LAN subnet to the route table
created.
If at all you must route all the traic through SD-WAN, create a default route whose next-hop is
pointing to Internal Load balancer IP.
© 1999-2021 Citrix Systems, Inc. All rights reserved. 376
To Next Page
Loading...