Citrix SD-WAN Platforms
10. From the Subnet drop-down list, select the private network subnet, and then click Continue.
11. On the next page, in the Advanced Instance Options section, you can change values from their
defaults if you choose, and then click
Continue
.
Note: SD-WAN AMI is not supported with more than one network interface. Therefore, the
value of Number of Network Interfaces fields is set to 1.!localized image
12. On the Request Instances Wizard page, enter a name for the EC2 instance in the Value text box,
and then click Continue.
On the Request Instances Wizard page, select one of the three Kay Pair options and then click
Continue.
© 1999-2021 Citrix Systems, Inc. All rights reserved. 387
To Next Page
Loading...