Citrix SD-WAN Platforms
Power Supply Type LED Color LED Indicates
AC OFF No power to any power
supply.
Flashing RED No power to this power
supply.
Flashing GREEN Power supply is in standby
mode.
GREEN Power supply is functional.
RED Power supply failure.
DC OFF No power to any power
supply.
Flashing RED No power to this power
supply.
Flashing BLUE Power supply is in standby
mode.
BLUE Power supply is functional.
RED Power supply failure.
Ports
Ports are used to connect the appliance to external devices. Citrix SD-WAN appliances support RS232
serial ports, 10/100/1000Base-T copper Ethernet ports, 1-gigabit copper and fiber 1G SFP ports, 10-
gigabit fiber SFP+, and 10G Base-T, ports. All Citrix SD-WAN appliances have a combination of some
or all of these ports. For details on the type and number of ports available on your appliance, see the
section describing that platform.
RS232 serial port
The RS232 serial console port provides a connection between the appliance and a computer, allowing
direct access to the appliance for initial configuration or troubleshooting.
All hardware platforms ship with an appropriate serial cable used to connect your computer to the ap-
pliance. For instructions on connecting your computer to the appliance, see Installing the Hardware.
Copper Ethernet ports
The copper Ethernet ports installed on many models of the appliance are standard RJ45 ports.
© 1999-2021 Citrix Systems, Inc. All rights reserved. 402
To Next Page
Loading...
Need help?
General