Citrix SD-WAN Platforms
• Description: The price list description of the part.
• Transmit Wavelength: The nominal transmit wavelength.
• Cable/Fiber Type: Fiber characteristics aect the maximum transmit distance achievable. This
is especially true with 10G on multi-mode fiber (MMF), where various dispersion components be-
come dominant. For more information, see http://www.thefoa.org/tech/ref/basic/fiber.html.
• Typical Reach: Maximum transmit distance.
• Products: Some chassis are available with dierent media options. Use the appropriate data
sheet to confirm that your particular chassis type supports the media.
1G pluggable media
The following table lists the maximum distance specifications for 1G transceivers.
Copper 1G SFP distance specifications
Description: 1G SFP Ethernet copper (100 m) - 4 pack
Transmitter wavelength (nm): Not applicable
Cable type: Category 5 (Cat-5) copper cable
Typical reach (m): 100m
Applicable platforms:
• SD-WAN 1100 SE and PE
Short reach fiber 1G SFP distance specifications
Description: 1G SFP Ethernet SX (300 m) - 4 pack
Transmitter wavelength (nm): 850 nm (nominal)
Fiber type: 50/125um MMF, 2000MHz-km (OM3)
Typical Reach (m): 550 m
Fiber type: 50/125um MMF, 500MHz-km (OM2)
Typical Reach (m): 550m
Fiber type: 50/125um MMF, 400MHz-km
Typical Reach (m): 550m
Fiber type:
62.5/125um MMF, 200MHz-km (OM1)
Typical Reach (m): 300m
Fiber type: 62.5/125um MMF, 160MHz-km
Typical Reach (m): 300m
© 1999-2021 Citrix Systems, Inc. All rights reserved. 404