Claas LEXION 480 - Cutterbar Drive; Removing the Front Pulley of Cutterbar Drive (1)

188 678.1 - RHB LEXION 480 7.4.1
Cutterbar drive
CUTTERBAR DRIVE
Removing the front pulley of cutterbar
drive (1)
Remove cutterbar drive belt (1) or (2) at the front.
Remove the feed rake conveyor suction blower drive
belt (34) if necessary – see page 7.3.26,
Removing the
feed rake conveyor suction blower drive belt (34)
.
Remove the clamping bolt from the clamping hub.
Open the clamping hub slightly with a chisel and
remove the pulley.
(Fig. 1, 2)
1
2
Cutterbar drive