Claas LEXION 480 - Straw Spreader Drive; Removing the Straw Spreader Bearing Housing

188 678.1 - RHB LEXION 480 7.11.1
Straw spreader drive
STRAW SPREADER DRIVE
Removing the straw spreader bearing housing
Removing the straw spreader drive belt (36) , see
page 7.3.28
Unscrew the angular brace (45).
(Fig. 1)
Unscrew hex. socket head bolts of set collar (20).
(Fig. 2)
Screw the end of the hex. socket head bolts into the
open hole of the toothed belt pulley (threaded face at
the set collar).
This pulls the set collar off of the toothed belt pulley.
(Fig. 3)
1
2
3
Straw spreader drive