Codan HF SSB - Page 161

Setup procedures—Part 4
HF SSB transceiver reference manual 8-9
Action Notes
7.
If you want to restrict
calls on all channels set
up with this selcall
group to one station,
enter the address of this
station (call address)
numeral
button
To cancel an existing address,
enter 0.
Leave this address blank if you
want to be able to enter the
address when sending the call.
8.
Press
F2
Example of the display:
EXIT
Self ID: 1 2 3 4 Codan
Selcall Group: 1
Select Selcall Type
ENTER
9.
To select the selcall
type, rotate
Select
Select:
•
Codan
for normal selcalls
•
RDD
for secure RDD
telcalls.
Setup procedures—Part 4
HF SSB transceiver reference manual 8-9
Action Notes
7.
If you want to restrict
calls on all channels set
up with this selcall
group to one station,
enter the address of this
station (call address)
numeral
button
To cancel an existing address,
enter 0.
Leave this address blank if you
want to be able to enter the
address when sending the call.
8.
Press
F2
Example of the display:
EXIT
Self ID: 1 2 3 4 Codan
Selcall Group: 1
Select Selcall Type
ENTER
9.
To select the selcall
type, rotate
Select
Select:
•
Codan
for normal selcalls
•
RDD
for secure RDD
telcalls.