Link Setup mode
9-4 HF SSB transceiver reference manual
Action Notes
5.
Follow one of the Link
Setup procedures to
make your changes.
See the Link Setup procedures
later in this chapter.
When all Link Setup
procedures have been
completed, continue with the
next step in this procedure.
6.
Switch off the
transceiver.
7.
Return the link to the
original parked
position.
8.
Replace the bottom
cover and screws.
You are now ready to switch
on the transceiver and continue
normal operation.
Link Setup mode
9-4 HF SSB transceiver reference manual
Action Notes
5.
Follow one of the Link
Setup procedures to
make your changes.
See the Link Setup procedures
later in this chapter.
When all Link Setup
procedures have been
completed, continue with the
next step in this procedure.
6.
Switch off the
transceiver.
7.
Return the link to the
original parked
position.
8.
Replace the bottom
cover and screws.
You are now ready to switch
on the transceiver and continue
normal operation.
To Next Page
Loading...
