Codan HF SSB User Manual

Display messages
HF SSB transceiver reference manual 10-9
Message Meaning Action
Scan abort Scanning has stopped
because the PTT or
another button was pressed.
To exit Scan mode, refer to the
HF SSB transceiver user guide,
Chapter 3, Scanning for
incoming calls.
Scan inhibited Scan table editing is not
currently allowed.
To allow scan tables to be edited,
see Chapter 8, Scan table editing
on/off.
Scan program
full
This scan table is full
because it contains the
maximum number of 10
channels.
See Chapter 3, Scan table
creation.
Scan-tuning The antenna is
automatically being tuned
now that Scan mode has
been initialised.
None.
SEEPROM
Ck/Sum Err
Data in the serial E
2
PROM
has become corrupted.
Contact your Codan agent for
help.
Serial
BBPROM bad
The transceiver cannot
read/write reliably to the
battery backup ROM on
power up.
Contact your Codan agent for
help.
Serial
EEPROM bad
The transceiver cannot
read/write reliably to the
serial E
2
PROM on power
up.
Contact your Codan agent for
help.
Serial
EEPROM fail
XX
The transceiver detected an
error in reading/writing
data to the serial E
2
PROM.
Contact your Codan agent for
help.
Telcall disabled Sending telcalls from the
transceiver is not currently
allowed.
To switch the availability of
telcalls on, see Chapter 8,
Telcall availability on/off.
Display messages
HF SSB transceiver reference manual 10-9
Message Meaning Action
Scan abort Scanning has stopped
because the PTT or
another button was pressed.
To exit Scan mode, refer to the
HF SSB transceiver user guide,
Chapter 3, Scanning for
incoming calls.
Scan inhibited Scan table editing is not
currently allowed.
To allow scan tables to be edited,
see Chapter 8, Scan table editing
on/off.
Scan program
full
This scan table is full
because it contains the
maximum number of 10
channels.
See Chapter 3, Scan table
creation.
Scan-tuning The antenna is
automatically being tuned
now that Scan mode has
been initialised.
None.
SEEPROM
Ck/Sum Err
Data in the serial E
2
PROM
has become corrupted.
Contact your Codan agent for
help.
Serial
BBPROM bad
The transceiver cannot
read/write reliably to the
battery backup ROM on
power up.
Contact your Codan agent for
help.
Serial
EEPROM bad
The transceiver cannot
read/write reliably to the
serial E
2
PROM on power
up.
Contact your Codan agent for
help.
Serial
EEPROM fail
XX
The transceiver detected an
error in reading/writing
data to the serial E
2
PROM.
Contact your Codan agent for
help.
Telcall disabled Sending telcalls from the
transceiver is not currently
allowed.
To switch the availability of
telcalls on, see Chapter 8,
Telcall availability on/off.

Codan HF SSB Specifications

General

Brand	Codan
Model	HF SSB
Category	Transceiver
Language	English