Codan HF SSB User Manual

Display messages
10-10 HF SSB transceiver reference manual
Message Meaning Action
Tone is
disabled
You cannot send a tone call
because no tone call group
has been assigned to this
channel.
To assign a tone call group to
this channel, see Chapter 3,
Channel creation and editing.
Transmit
inhibited
The current channel is a
receive-only channel.
Select a channel enabled for
transmission.
Tune abort Antenna tuning has been
cancelled because the PTT
button on the microphone
has been pressed.
If necessary, tune the antenna
again.
Tune fail Antenna tuning failed. Check the position of the
antenna (for example, too close
to buildings), then press the
Tune
button to tune the antenna
again.
Tune pass The antenna was
successfully tuned.
None.
Tuner fault The transceiver failed to
tune the antenna within
two minutes.
Check the installation (for
example, cables to the antenna
tuner), then press the
Tune
button to tune the antenna again.
If the problem remains, contact
your Codan agent for help.
Tuning The Tune button was
pressed and the antenna is
now being tuned.
None.
Unknown error:
XX
The transceiver detected an
unknown data error.
Contact your Codan agent for
help.
Unlock error
VC01
VC01 is unlocked. Contact your Codan agent for
help.
Unlock error
VC01&2
VC01 and VC02 are
unlocked.
Contact your Codan agent for
help.
Display messages
10-10 HF SSB transceiver reference manual
Message Meaning Action
Tone is
disabled
You cannot send a tone call
because no tone call group
has been assigned to this
channel.
To assign a tone call group to
this channel, see Chapter 3,
Channel creation and editing.
Transmit
inhibited
The current channel is a
receive-only channel.
Select a channel enabled for
transmission.
Tune abort Antenna tuning has been
cancelled because the PTT
button on the microphone
has been pressed.
If necessary, tune the antenna
again.
Tune fail Antenna tuning failed. Check the position of the
antenna (for example, too close
to buildings), then press the
Tune
button to tune the antenna
again.
Tune pass The antenna was
successfully tuned.
None.
Tuner fault The transceiver failed to
tune the antenna within
two minutes.
Check the installation (for
example, cables to the antenna
tuner), then press the
Tune
button to tune the antenna again.
If the problem remains, contact
your Codan agent for help.
Tuning The Tune button was
pressed and the antenna is
now being tuned.
None.
Unknown error:
XX
The transceiver detected an
unknown data error.
Contact your Codan agent for
help.
Unlock error
VC01
VC01 is unlocked. Contact your Codan agent for
help.
Unlock error
VC01&2
VC01 and VC02 are
unlocked.
Contact your Codan agent for
help.

Codan HF SSB Specifications

General

Brand	Codan
Model	HF SSB
Category	Transceiver
Language	English