Installation
2-10 HF SSB transceiver reference manual
4. Plug in the control cable at the Remote Control
connector on the transceiver. Ensure that it is securely
fastened.
The control cable is six metres long. Do not cut the control
or loudspeaker cable. If either cable is too long, gather the
excess neatly and secure it out of the way.
When connecting the microphone, gently rotate the plug in
the microphone socket until the pins locate. Push the plug
home and fasten the locking ring until finger-tight. Do not
over tighten.
Installation
2-10 HF SSB transceiver reference manual
4. Plug in the control cable at the Remote Control
connector on the transceiver. Ensure that it is securely
fastened.
The control cable is six metres long. Do not cut the control
or loudspeaker cable. If either cable is too long, gather the
excess neatly and secure it out of the way.
When connecting the microphone, gently rotate the plug in
the microphone socket until the pins locate. Push the plug
home and fasten the locking ring until finger-tight. Do not
over tighten.
To Next Page
Loading...
