Codan HF SSB User Manual

Appendix
HF SSB transceiver reference manual 11-13
Action Notes
7.
Use the COMP A and
COMP B switches to
set the baud rate for the
computer.
Refer to the table above. The
most common setting is 9600
baud.
8.
Replace the cover and
secure it with the
screw.
If you want to connect more ancillary equipment such as an
additional computer, plug a second interface into the
Remote Control connector of the first interface.
Make sure that the I
2
C switches are not set to the same
position for both units. Set one to the on position and the
other to the off position.

Appendix
HF SSB transceiver reference manual 11-13
Action Notes
7.
Use the COMP A and
COMP B switches to
set the baud rate for the
computer.
Refer to the table above. The
most common setting is 9600
baud.
8.
Replace the cover and
secure it with the
screw.
If you want to connect more ancillary equipment such as an
additional computer, plug a second interface into the
Remote Control connector of the first interface.
Make sure that the I
2
C switches are not set to the same
position for both units. Set one to the on position and the
other to the off position.


Codan HF SSB Specifications

General

Brand	Codan
Model	HF SSB
Category	Transceiver
Language	English