Codan HF SSB - Page 44

Channel and scan table setup
3-18 HF SSB transceiver reference manual
Action Notes
4.
Press
F1
Example of the display:
208
DELETE ENTER
Enter Channel No.
5.
Enter the number of
the new channel
numeral
button
Do not enter the number of a
channel that already exists.
6.
Press
Enter
R'call
The display should look like
this:
1
EXIT ENTER
Enter Options
Upper sideband
U NP
If you entered the number of a
channel that already exists, the
transceiver beeps. Start the
procedure again by pressing
PTT
Channel and scan table setup
3-18 HF SSB transceiver reference manual
Action Notes
4.
Press
F1
Example of the display:
208
DELETE ENTER
Enter Channel No.
5.
Enter the number of
the new channel
numeral
button
Do not enter the number of a
channel that already exists.
6.
Press
Enter
R'call
The display should look like
this:
1
EXIT ENTER
Enter Options
Upper sideband
U NP
If you entered the number of a
channel that already exists, the
transceiver beeps. Start the
procedure again by pressing
PTT