Codan HF SSB User Manual

Using Setup mode procedures
4-6 HF SSB transceiver reference manual
Procedure Page Setup
code
Description
Scan table
automatic scanning
start (standard)
8-2 11 Sets the time delay between finishing a call
and resuming automatic scanning.
Scan table editing
on/off (standard)
8-4 12 Switches on or off scan table editing.
Selcall address
setup
8-6 211 Sets up your address for any of your
transceiver’s five selcall groups S1–S5.
Selcall address size
compatibility
8-13 213 Selects how you communicate with stations
that are incapable of using addresses longer
than four digits.
Selcall lockout
on/off
8-16 2441 Switches on or off selcall lockout.
Selcall mute
availability on/off
8-18 212 Switches on or off the availability of selcall
mute on the control panel (the S’Call Mute
button).
Status call
availability on/off
8-20 24442 Switches on or off the ability to send the
three types of status call—remote diagnostics
call, remote config call and user status call.
Telcall availability
on/off
8-22 22 Switches on or off the ability to send telcalls.
Tone call setup
(standard)
8-24 23 Sets up the high and low frequency pairs for
any of the four tone call groups T1–T4.
99-beacon call
response on/off
8-27 241 Switches on or off the ability to respond to
received 99-beacon calls (selcalls ending in
99).

Using Setup mode procedures
4-6 HF SSB transceiver reference manual
Procedure Page Setup
code
Description
Scan table
automatic scanning
start (standard)
8-2 11 Sets the time delay between finishing a call
and resuming automatic scanning.
Scan table editing
on/off (standard)
8-4 12 Switches on or off scan table editing.
Selcall address
setup
8-6 211 Sets up your address for any of your
transceiver’s five selcall groups S1–S5.
Selcall address size
compatibility
8-13 213 Selects how you communicate with stations
that are incapable of using addresses longer
than four digits.
Selcall lockout
on/off
8-16 2441 Switches on or off selcall lockout.
Selcall mute
availability on/off
8-18 212 Switches on or off the availability of selcall
mute on the control panel (the S’Call Mute
button).
Status call
availability on/off
8-20 24442 Switches on or off the ability to send the
three types of status call—remote diagnostics
call, remote config call and user status call.
Telcall availability
on/off
8-22 22 Switches on or off the ability to send telcalls.
Tone call setup
(standard)
8-24 23 Sets up the high and low frequency pairs for
any of the four tone call groups T1–T4.
99-beacon call
response on/off
8-27 241 Switches on or off the ability to respond to
received 99-beacon calls (selcalls ending in
99).


Codan HF SSB Specifications

General

Brand	Codan
Model	HF SSB
Category	Transceiver
Language	English