122 CTERA C-Series User Guide
b In the fields provided, type your appliance user name and password.
c Click OK.
The FTP index appears.
FTP testing is not available if you chose to allow only SSL/TLS connections.
4 Click Save.
Table 27: FTP Server Fields
Select this option to enable FTP access to your network shares on the
CTERA FTP Server.
Additional fields are enabled.
Allow only SSL/TLS
connections
Select this option to allow only Secure Socket Layer (SSL) and
Transport Layer Security (TLS) connections to your network shares
on the FTP Server.
Maximum Connections per
Client
Type the maximum number of concurrent FTP connections allowed
per client.
The default value is 5.
Type the message that should appear at the top of the page when
accessing the network shares via FTP.
The default value is "Welcome to CTERA FTP."
Allow anonymous FTP
downloads
Select this option to allow users to access and download files from a
specific directory on the FTP server, without authenticating.
The Anonymous FTP Directory and Limit downloads bandwidth
fields are enabled.
Specify the directory from which anonymous downloads should be
allowed, by doing one of the following:
Click , and select the desired directory in the Folder
Browser.
Type the path to the desired directory.
Limit downloads bandwidth
Select this option to restrict the bandwidth used for FTP downloads.
Then type the maximum bandwidth to use for FTP downloads in
kilobytes per second.
To Next Page
Loading...
