Monitoring Your CTERA Appliance 17
CTERA C-Series User Guide 291
Table 58: Volume Statuses
The volume is encrypted and requires a key.
The file system needs to be repaired.
The file system is incompatible with current firmware.
Failed to read the file system status.
No file system was found in the volume.
The volume is ready for use.
The file system is being recovered after a non-clean shutdown.
Routine cleanup is being performed after a non-clean shutdown.
The volume is being formatted.
The volume is being converted (from EXT3 to NEXT3, or the opposite).
The volume is being resized.
The volume is being repaired.
The volume is being scanned for errors.
The volume's storage quotas are being recalculated.
Viewing Detailed Information About a Disk Drive
From the Status Dashboard, you can choose to view additional, detailed information about a
disk drive.
To view additional information about a disk drive
1 In the Configuration tab's navigation pane, click Main > Dashboard.
The Main > Dashboard page appears.
2 In the Hard Disk Drives area, click on the drive for which you want information.
To Next Page
Loading...
