Ctera C800 - Deleting Arrays; Scheduling Automatic Data Scrubbing

Managing Storage 7
CTERA C-Series User Guide 71
11 Click Finish.
Deleting Arrays
Warning
Deleting an array will result in the loss of all existing data on the array.
To delete an array
1 In the Configuration tab's navigation pane, click Storage > Arrays.
The Storage > Arrays page appears.
2 Select the desired array and click Delete.
A confirmation message appears.
3 Click Yes.
The array is deleted.
Scheduling Automatic Data Scrubbing
You can configure the appliance to perform RAID data scrubbing on a regular basis. During
data scrubbing, the appliance reads all the disks in a RAID array and checks for defective
blocks, thus reducing the likelihood of silent data corruption and data loss due to bit errors.
By default, automatic scrubbing is performed on a weekly basis for all defined RAID arrays. It
can also be run manually for specific arrays, as described in Manually Starting Data
Scrubbing (on page 73).
To schedule automatic data scrubbing for all RAID arrays
1 In the Configuration tab's navigation pane, click Storage > Arrays.
The Storage > Arrays page appears.
2 Click Scheduled Scrubbing.