Workflow
In order to share files across your network, you must perform the following steps:
1 Configure the folders that you want to share, by doing the following:
a Add a network share on a folder.
See Adding and Editing Network Shares (on page 101).
b If you are using Windows Files Sharing, copy the files that you want to share to the
folder.
See Copying Files to a Network Share Using Windows File Sharing (on page 108).
2 Set up file sharing protocols, by doing one or more of the following:
To enable access to network shares using Windows Files Sharing, see Configuring
Windows File Sharing (on page 114).
To enable access to network shares via the CTERA FTP Server, see Configuring FTP
Access (on page 121).
To enable access to network shares via the CTERA RSync Server, see Configuring
RSync Access (on page 123).
To enable access to network shares using Apple File Sharing, see Configuring Apple
File Sharing (on page 124).
To enable access to network shares using NFS, see Configuring NFS Access (on page
125).
Managing Network Shares
Network shares can be managed in the Configuration tab or the File Manager.
To Next Page
Loading...
