CTERA C-Series User Guide 167
To use settings configured in the CTERA Portal, click Use portal settings.
3 Complete the fields using the information in the following table.
4 Click Save.
Table 34: Backup Schedule Fields
Choose this option to automatically back up files every specified
number of hours.
The Start Every field is enabled, and you must complete it.
Type the amount of time between automatic cloud backups, in
hours.
The default value is 24 hours.
Choose this option to automatically back up files according to a
specified daily schedule.
The Start Time, Stop Time, and On Days fields are enabled, and
you must complete them.
Select the time at which cloud backup should start.
Note: If a given backup extends past the scheduled time for the
next automatic backup, the next automatic backup will
commence immediately upon completion of the prior backup.
Select the time at which cloud backup must end. This can be
any of the following:
A specific hour
On Completion. The backup operation will only end when
cloud backup is complete.
The default value is On Completion.
Note: If the amount of changed data to back up is large, the
backup process can take several hours or days. Therefore, if a
stop time is configured, the backup process may not be
completed within the time frame. For example, if you specify
that data should be backed up between 12 AM - 2 AM, and the
backup requires 3 hours, the backup will not be completed.
Select the days on which cloud backup should be performed.
This can be any of the following:
One or more specific days
Every Day. Cloud backup will occur every day.
The default value is Every Day.
To Next Page
Loading...
