Monitoring Your CTERA Appliance 17
CTERA C-Series User Guide 297
Table 61: Log Settings Fields
Type the number of days that the appliance should store logs.
The default value is 10 days.
Select the volume where the appliance should store logs.
If you choose Memory, the logs will be deleted each time you reboot
the appliance. This option is selected by default when no disks are
installed.
If you choose the name of a volume, the logs will be stored on that
volume.
Select the minimum log level to display in the appliance Web
interface.
For example, if you select Critical, then only Alert, Critical, and
Emergency logs will appear in the appliance Web interface.
The default value is Info.
The appliance automatically logs all backup and restore operations.
Specify whether appliance should display additional information
about files that are backed up and restored, by selecting one of the
following:
Log Every File. Provide additional information about all backed
up and restored files.
Log Errors Only. Only provide additional information about files
for which errors occurred during backup and restore operations.
No Logging. Do not provide additional information about backed
up and restored files.
The additional information includes file name, deduplication ratio,
and more. See Viewing Backup Logs (see "Viewing Cloud Backup
Logs" on page 303).
The default level is Log Errors Only.
To Next Page
Loading...
