D-Link DSR-1000 User Manual

D-Link DSR-Series User Manual 28
Section 4 - LAN Conguration
Mode Select the mode as Stateless or Statefull.
Domain Name Enter the name of the domain (Optional) for this DHCPv6 server.
Server Preference
Enter the server preference value. This is used by the stateless DHCP to indicate the preference level of
this DHCP server. DHCPv6 clients will pick up the DHCPv6 server which has highest preference value.
The preference value must be a decimal integer and be between 0 and 255 (inclusive).
DNS Servers
Select one of the following options for DNS servers for the DHCPv6 clients:
• Use DNS Proxy: Enable or disable DNS Proxy on this VLAN.
• Use DNS from ISP: This option allows the ISP to dene the DNS servers (primary/secondary) for the
VLAN DHCP client.
• Use Below: If this is selected, the below congured Primary and Secondary DNS servers are used for
DHCPv6 clients.
Primary DNS Server Enter the primary DNS Server IP.
Secondary DNS Server Enter the secondary DNS Server IP.
Lease/Rebind Time Enter the duration (in seconds) for which IP addresses will be leased to clients.
Prex Delegation Enable or disable Prex Delegation.
Save Click Save to save and activate your settings.

D-Link DSR-1000 Specifications

General

Brand	D-Link
Model	DSR-1000
Category	Network Router
Language	English