Daewoo NUBIRA - Clutch Pedal Installation

5C0 – 8ICLUTCH
DAEWOO V–121 BL4
Installation Procedure
1. Install the clutch pedal with the return spring to the
mount brace.
2. Coat the piston rod bolt with multi–purpose grease.
3. Install the piston rod bolt and the locking washer.
4. Coat the pedal mounting shaft with multi–purpose
grease.
5. Install the pedal mounting shaft, the washer, and
the nut.
Tighten
Tighten the clutch pedal nut to 18 NSm (13 lb–ft).
6. Connect the return spring to the mount brace.
7. Connect the negative battery cable.