INSTRUMENT/DRIVER INFORMATION 9E – 31
DAEWOO V–121 BL4
Installation Procedure
1. Install the speedometer/odometer in the instrument
cluster with the screws.
Tighten
Tighten the speedometer/odometer screws to 2.5
NSm (22 lb–in).
2. Install the fuel gauge with the screws.
Tighten
Tighten the fuel gauge screws to 2.5 NSm (22 lb–in).
3. Install the instrument cluster lens with the screws.
4. Install the instrument cluster. Refer to ”Instrument
Cluster” in this section.
5. Connect the negative battery cable.
To Next Page
