9D – 18IWIPERS/WASHER SYSTEMS
DAEWOO V–121 BL4
WINDSHIELD WASHER NOZZLES
Removal Procedure
1. Remove the cowl vent grille. Refer to Section 9R,
Body Front End.
2. Disconnect the washer hose from the nozzle.
3. Remove the nozzle from the cowl vent grille.
Installation Procedure
1. Install the nozzle onto the cowl vent grille.
2. Connect the washer hose to the nozzle.
3. Install the cowl vent grille. Refer to Section 9R,
Body Front End.
WINDSHIELD WASHER HOSES
(Typical)
Removal Procedure
1. Remove the cowl vent grille. Refer to Section 9R,
Body Front End.
2. Disconnect the windshield washer hose from the
washer nozzles.
To Next Page
