9P – 22IDOORS
DAEWOO V–121 BL4
4. Remove the nuts and the regulator.
Installation Procedure
Notice : Dissimilar metals in direct contact with each other
may corrode rapidly. Make sure to use the correct fasten-
ers to prevent premature corrosion.
1. Install the window regulator with the nuts.
Tighten
Tighten the window regulator nuts to 8 NSm (71 lb–in).
2. Connect the electrical connector.
3. Install the front door glass. Refer to Section 9L,
Glass and Mirrors.
4. Connect the negative battery cable.
To Next Page
