Daewoo NUBIRA - Rear Heating Duct

HEATING AND VENTILATION SYSTEM 7A – 27
DAEWOO V–121 BL4
4. Install the heater core cover.
5. Install and tighten the screws that secure the heater
core cover to the heater/air distributor case assem-
bly.
Tighten
Tighten the heater core cover screws to NSm (lb–in).
6. Install the actuators for the vent/floor and the de-
froster doors.
7. Install the heater/air distributor case. Refer to
”Heater/Air Distributor Case Assembly” in this sec-
tion.
8. Install the instrument panel. Refer to Section 9E,
Instrumentation/Driver Information.
9. Fill the cooling system.
10. Connect the negative battery cable.
REAR HEATING DUCT
Some vehicles are equipped with rear seat heating ducts.
Should there be no airflow to the rear, look for any obstruc-
tions, such as items on the floor under the front seats.
Also, check for air leaks between the heater/air distributor
assembly and the rear ducts.