9O – 2IBUMPERS AND FASCIAS
DAEWOO V–121 BL4
MAINTENANCE AND REPAIR
ON–VEHICLE SERVICE
FRONT BUMPER FASCIA
Removal Procedure
1. Disconnect the negative battery cable.
2. Remove the front wheels. Refer to Section 2E,
Tires and Wheels.
3. Remove the bolts and the screws and reposition
the front portion of the splash shields.
4. Remove the fog lamps (if equipped). Refer to Sec-
tion 9B, Lighting Systems.
5. Remove the headlamps. Refer to Section 9B, Light-
ing Systems.
6. Remove the front wheel well fascia bolts.
7. Remove the fender–to–fascia bolts.n.
To Next Page
