BUMPERS AND FASCIAS 9O – 5
DAEWOO V–121 BL4
5. Install the fender–to–fascia bolts.
Tighten
Tighten the fender–to–fascia bolts to 1.5 NSm (13
lbin).
6. Install the front wheel well fascia bolts.
Tighten
Tighten the front wheel well fascia bolts to 1.5 NSm (13
lb–in).
7. Install the headlamps. Refer to Section 9B, Lighting
Systems.
8. Remove the fog lamps (if equipped). Refer to Sec-
tion 9B, Lighting Systems.
9. Reposition the front portion of the splash shields
and install the bolts and the screws.
Tighten
Tighten the front wheel well splash shield bolts to 1.5
NSm (13 lb–in).
10. Connect the negative battery cable.
To Next Page
