Figure 4-75
4.9.1.2 Trigger Snapshot
Please follow the steps listed below to enable the activation snapshot function. After you enabled this
function, system can snapshot when the corresponding alarm occurs.
In main menu, from Setting->Camera->Encode->Snapshot interface, here you can input snapshot
mode as trigger, size, quality and frequency. See Figure 4-76.
In main menu, from Setting->Video detect->Motion detect, please enable snapshot function for
specified channels (Figure 4-77). Or In main menu, from Setting->Event->Alarm (Figure 4-78)
please enable snapshot function for specified channels.
To Next Page
Loading...
