. Figure 4-169
4.15.8.5 IPC Offline Alarm
Once you select this item, system can generate an alarm when the front-end IPC disconnects with the
local DVR. The alarm can activate record, PTZ, snap and etc. The alarm can last until the IPC and the
HDVR connection resumes.
In the main menu, from Setting->Event->Alarm->IPC offline, the interface is shown as below. See
Figure 4-170.
Please refer to chapter 4.15.8.1 to set parameters and then click OK button to save current setup.
To Next Page
Loading...
Need help?
General