5.5.2.3 WIFI
Please note this function is for the device of WIFI module.
This function allows you to connect the DVR to the network via the WIFI.
From main window->Setup->Network->WIFI, the WIFI interface is shown as in Figure 5-43.
Figure 5-43
Please check the box to enable WIFI function and then click the Search SSID button. Now you can view
all the wireless network information in the following list. Double click a name to connect to it. Click
Refresh button, you can view latest connection status.
5.5.2.4 3G
5.5.2.4.1 CDMA/GPRS
From main window->Setup->Network->3G, the CDMA/GPRS interface is shown as in Figure 5-44.
Note
After you connected the 3G module, you can view the module information and wireless signal. If there is
no information, click Search button to search.
To Next Page
Loading...
