Dahua HCVR82**A-S3 Series - Page 267

255
Parameter
Function
Health mail
enable
Please check the box here to enable this function.
Update period
(interval)
This function allows the system to send out the test email to
check the connection is OK or not.
Please check the box to enable this function and then set the
corresponding interval.
System can send out the email regularly as you set here.
Email test
The system will automatically sent out a email once to test the
connection is OK or not .Before the email test, please save the
email setup information.
5.5.2.9 FTP
You need to download or buy FTP service tool (such as Ser-U FTP SERVER) to establish FTP service.
Please install Ser-U FTP SERVER first. From “start” -> “program” -> Serv-U FTP Server -> Serv-U
Administrator. Now you can set user password and FTP folder. Please note you need to grant write right
to FTP upload user.
From main window->Setup->Network->FTP, the FTP interface is shown as in Figure 5-51.
It is to set FTP IP, port and etc for remote storage.
Figure 5-51
Please refer to the following sheet for detailed information.
Parameter
Function
Host IP
The host IP you have installed the FTP server.
Port
The default setup is 21.
User
name/Password
The account for you to access the FTP server.